Difference between revisions of "ESP8266012E adapter board"

From B-Wiki
Jump to navigation Jump to search
(Created page with "{| class="wikitable" style="float:right; margin-left: 10px;" | {{FULLPAGENAME}} | {{#qrlite:{{fullurl:{{FULLPAGENAME}}}}|format=svg|size=2|ecc=1|margin=0}} |- | colspan="2"|...")
(No difference)

Revision as of 21:30, 17 June 2019

ESP8266012E adapter board



FR120N Isolated MOSFET
  • With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.
  • Compatible with MCU and Arduino control board, 3V or 5V signal
  • High level start, low level stop, PWM speed regulation
  • Widely used to control the start and stop of the motor, solenoid valve and other tributary equipment
  • The signal input side can be welded to the terminal or pin itself, compatible breadboard
  • Output can be soldered to the terminal or direct wire
  • Module size 23mm X 16mm There are two 2mm diameter screw holes, hole spacing 8mm
  • Specifications of MOS tube: 100V 9.4A

File:ESP8266012E adapter board bottom


Parameter Value
Input Voltage 3V-5V
Output Voltage 0V-100V
Output Current 9.4A(max)
Module Size 23mmx16mm
Stock 6pcs

Pin mapping

Mapping Name on the board Pin Function Schematic Pin R120N Isolated MOSFET connection.jpg Schematic Pin Pin Function Name on board Mapping
+ V+ P3-1 P2-1 P1-1 3/5V PWM input PWM
LOAD Drain connection P2-2 P2-3
- Source connection P3-2 P1-2 GND GND
To edit table: File:FR120N_Isolated_MOSFET_mapping.tgn

Link to buy