ESP8266012E adapter board
ESP8266012E adapter board |
|
https://bogza.ro/index.php/ESP8266012E_adapter_board |
Features
- With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.
- Compatible with MCU and Arduino control board, 3V or 5V signal
- High level start, low level stop, PWM speed regulation
- Widely used to control the start and stop of the motor, solenoid valve and other tributary equipment
- The signal input side can be welded to the terminal or pin itself, compatible breadboard
- Output can be soldered to the terminal or direct wire
- Module size 23mm X 16mm There are two 2mm diameter screw holes, hole spacing 8mm
- Specifications of MOS tube: 100V 9.4A
File:ESP8266012E adapter board bottom
Specifications
Parameter | Value |
---|---|
Input Voltage | 3V-5V |
Output Voltage | 0V-100V |
Output Current | 9.4A(max) |
Module Size | 23mmx16mm |
Stock | 6pcs |
Pin mapping