Microwave Radar Detector Module RCWL-0516: Difference between revisions

From B-Wiki
Jump to navigation Jump to search
(Created page with "== Features == {| class="wikitable" style="float:right; margin-left: 10px;" | {{FULLPAGENAME}} | {{#qrlite:{{fullurl:{{FULLPAGENAME}}}}|format=svg|size=2|ecc=1|margin=0}} |-...")
 
No edit summary
Line 11: Line 11:


Product Introduction:
Product Introduction:
1.Operating Voltage:4-28V
* 1.Operating Voltage:4-28V
2.Operating Current:2.8mA (typical);3mA (max)
* Operating Current:2.8mA (typical);3mA (max)
3.Detection Distance:5-9m
* Detection Distance:5-9m
4.Transmitting Power:20mW (typical);30mW (max)
* Transmitting Power:20mW (typical);30mW (max)
5.Output Voltage:3.2-3.4V
* Output Voltage:3.2-3.4V
6.Output Voltage Driving Capacity:100mA
* Output Voltage Driving Capacity:100mA
7.Trigger Way:repeat trigger
* Trigger Way:repeat trigger
8.Output Control Low Level:0V
* Output Control Low Level:0V
9.Output Control High Level:3.3V
* Output Control High Level:3.3V
10.Operating Temperature:-20~80 celsius
* Operating Temperature:-20~80 celsius
11.Storage Temperature:-40~100 celsius
* Storage Temperature:-40~100 celsius
12.RCWL-0516 microwave radar sensor switch module human sensor module intelligent sensor detector sensing distance of about 5-7 meters
* RCWL-0516 microwave radar sensor switch module human sensor module intelligent sensor detector sensing distance of about 5-7 meters
 
== Adjustment Part Introduction ==
* C-TM


Adjustment Part Introduction:
1.C-TM
Adjust repeat trigger time,default trigger time is 2s;increasing capacitor's capacity will make repeat trigger time longer;and actual counting trigger time can operate as below:
Adjust repeat trigger time,default trigger time is 2s;increasing capacitor's capacity will make repeat trigger time longer;and actual counting trigger time can operate as below:
Stick capacitor on C-TM,test 9196 3-pin frequency F,repeat trigger time T=(1/f)*32768
Stick capacitor on C-TM,test 9196 3-pin frequency F,repeat trigger time T=(1/f)*32768


2.R-GN
* R-GN
 
Detection distance adjustment;connect with resistor and detection distance will become shorter;if not connect,detection distance is 7m;if connect with 1M ohm resistor,detection distance is 5m
Detection distance adjustment;connect with resistor and detection distance will become shorter;if not connect,detection distance is 7m;if connect with 1M ohm resistor,detection distance is 5m


3.R-CDS
* R-CDS
 
Internal VCC parallel connect with internal 1M ohm resistor to CDS pin (that is 196 9-pin) by R-CDS ,CDS connects with photoresistor,you can close detection function at night
Internal VCC parallel connect with internal 1M ohm resistor to CDS pin (that is 196 9-pin) by R-CDS ,CDS connects with photoresistor,you can close detection function at night


Pin Definition:
== Pin Definition ==
1.3V3:3V3 power output
* 3V3:3V3 power output
2.GND:ground
* GND:ground
3.OUT:control output;when detect moving objects,it will output high level
* OUT:control output;when detect moving objects,it will output high level
4.VIN:input voltage,4-28V
* VIN:input voltage,4-28V
5.CDS:enable control chip,lower than 0.7V,OUT will output low level all the time
* CDS:enable control chip,lower than 0.7V,OUT will output low level all the time


[[File:RCWL-0516.jpg|thumb|Buck converter top]]
[[File:RCWL-0516.jpg|thumb|Buck converter top]]

Revision as of 10:14, 24 March 2019

Features

Microwave Radar Detector Module RCWL-0516

https://bogza.ro/index.php/Microwave_Radar_Detector_Module_RCWL-0516

RCWL-0516 Microwave Radar Sensor Switch Module Human Induction Detector

Product Introduction:

  • 1.Operating Voltage:4-28V
  • Operating Current:2.8mA (typical);3mA (max)
  • Detection Distance:5-9m
  • Transmitting Power:20mW (typical);30mW (max)
  • Output Voltage:3.2-3.4V
  • Output Voltage Driving Capacity:100mA
  • Trigger Way:repeat trigger
  • Output Control Low Level:0V
  • Output Control High Level:3.3V
  • Operating Temperature:-20~80 celsius
  • Storage Temperature:-40~100 celsius
  • RCWL-0516 microwave radar sensor switch module human sensor module intelligent sensor detector sensing distance of about 5-7 meters

Adjustment Part Introduction

  • C-TM

Adjust repeat trigger time,default trigger time is 2s;increasing capacitor's capacity will make repeat trigger time longer;and actual counting trigger time can operate as below:

Stick capacitor on C-TM,test 9196 3-pin frequency F,repeat trigger time T=(1/f)*32768

  • R-GN

Detection distance adjustment;connect with resistor and detection distance will become shorter;if not connect,detection distance is 7m;if connect with 1M ohm resistor,detection distance is 5m

  • R-CDS

Internal VCC parallel connect with internal 1M ohm resistor to CDS pin (that is 196 9-pin) by R-CDS ,CDS connects with photoresistor,you can close detection function at night

Pin Definition

  • 3V3:3V3 power output
  • GND:ground
  • OUT:control output;when detect moving objects,it will output high level
  • VIN:input voltage,4-28V
  • CDS:enable control chip,lower than 0.7V,OUT will output low level all the time
Buck converter top


Specifications

Parameter Value
Input Voltage 3.2V-40V
Output Voltage 1.25V-35V
Output Current 3A(max)
Transfer Efficiency 92%(max)
Switching Frequency 65KHz
Module Size 43mm(length)*21mm(width)
Stock 10pcs

Link to buy

https://www.ebay.com/itm/10pcs-Mini-Power-Supply-Step-Down-Module-LM2596s-3A-DC-to-DC-Buck-Converter/263576748379?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Retrieved from "https://bogza.ro/index.php?title=Microwave_Radar_Detector_Module_RCWL-0516&oldid=83"