RS232 over WIFI: Difference between revisions
Jump to navigation
Jump to search
m (→Tools needed) |
m (→Tools needed) |
||
| Line 7: | Line 7: | ||
Flashing: https://github.com/jeelabs/esp-link/blob/master/FLASHING.md | Flashing: https://github.com/jeelabs/esp-link/blob/master/FLASHING.md | ||
<syntaxhighlight> | |||
esptool.py --port /dev/ttyUSB0 --baud 460800 write_flash -fs 4m -ff 40m \ | esptool.py --port /dev/ttyUSB0 --baud 460800 write_flash -fs 4m -ff 40m \ | ||
0x00000 boot_v1.5.bin 0x1000 user1.bin \ | 0x00000 boot_v1.5.bin 0x1000 user1.bin \ | ||
0x7C000 esp_init_data_default.bin 0x7E000 blank.bin | 0x7C000 esp_init_data_default.bin 0x7E000 blank.bin | ||
</syntaxhighlight> | |||
* platformio configuration | * platformio configuration | ||
<syntaxhighlight> | |||
upload_port = socket://192.168.2.253:23 | upload_port = socket://192.168.2.253:23 | ||
monitor_port = socket://192.168.2.253:23 | monitor_port = socket://192.168.2.253:23 | ||
</syntaxhighlight> | |||
Revision as of 21:06, 1 January 2024
Tools needed
Application for the esp8266 to have a bridge to the device
Flashing: https://github.com/jeelabs/esp-link/blob/master/FLASHING.md
<syntaxhighlight> esptool.py --port /dev/ttyUSB0 --baud 460800 write_flash -fs 4m -ff 40m \
0x00000 boot_v1.5.bin 0x1000 user1.bin \ 0x7C000 esp_init_data_default.bin 0x7E000 blank.bin
</syntaxhighlight>
- platformio configuration
<syntaxhighlight> upload_port = socket://192.168.2.253:23 monitor_port = socket://192.168.2.253:23 </syntaxhighlight>