FR120N Isolated MOSFET MOS Tube FET Relay Module
Jump to navigation
Jump to search
| FR120N Isolated MOSFET MOS Tube FET Relay Module |
|
| https://bogza.ro/index.php/FR120N_Isolated_MOSFET_MOS_Tube_FET_Relay_Module | |
Features
- With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.
- Compatible with MCU and Arduino control board, 3V or 5V signal
- High level start, low level stop, PWM speed regulation
- Widely used to control the start and stop of the motor, solenoid valve and other tributary equipment
- The signal input side can be welded to the terminal or pin itself, compatible breadboard
- Output can be soldered to the terminal or direct wire
- Module size 23mm X 16mm There are two 2mm diameter screw holes, hole spacing 8mm
- Specifications of MOS tube: 100V 9.4A
Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 3V-5V |
| Output Voltage | 0V-100V |
| Output Current | 9.4A(max) |
| Module Size | 23mmx16mm |
| Stock | 6pcs |
Pin mapping
| Mapping | Name on the board | Pin Function | Schematic Pin | 
|
Schematic Pin | Pin Function | Name on board | Mapping |
|---|---|---|---|---|---|---|---|---|
| + | V+ | P3-1 P2-1 | P1-1 | 3/5V PWM input | PWM | |||
| LOAD | Drain connection | P2-2 | P2-3 | |||||
| - | Source connection | P3-2 | P1-2 | GND | GND | |||
| To edit table: File:FR120N_Isolated_MOSFET_mapping.tgn | ||||||||