Smart presence sensor T19SMWV01: Difference between revisions
Jump to navigation
Jump to search
Line 248: | Line 248: | ||
|- | |- | ||
| VCC | | VCC | ||
| | | POWER_IN | ||
|- | |- | ||
| Trig | | Trig | ||
Line 257: | Line 257: | ||
|- | |- | ||
| GND | | GND | ||
| | | GND | ||
|- | |- | ||
| colspan="3" | To edit table: [[File:HC-SR04.tgn]] | | colspan="3" | To edit table: [[File:HC-SR04.tgn]] | ||
|} | |} |
Revision as of 08:17, 7 April 2019
Smart presence sensor T19SMWV01 |
|
https://bogza.ro/index.php/Smart_presence_sensor_T19SMWV01 |
Description
Sensor has been designed to have 3 motion / distance sensors that couple together to give an accurate reading of the presence inside one room.
Specification
Modules used
IO config sheet
Arduino Nano
Mapping | Arduino PIN | Pin Function | Serial Pin | PORT | Board pin name | Board pin name | PORT | ADC | Serial Pin | Arduino PIN | Mapping | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | TXD | PD1 | TX1 | VIN | POWER_IN | |||||||
0 | RXD | PD0 | RX0 | GND | GND | |||||||
PC6 | RST | RST | PC6 | |||||||||
GND | 5V | |||||||||||
2 | INT0 | PD2 | D2 | A7 | ADC7 | A7 | ||||||
3 | OC2B / INT1 | PD3 | D3 | A6 | ADC6 | A6 | ||||||
4 | XCK / T0 | PD4 | D4 | A5 | PC5 | ADC5 | SCL | 19 A5 | HV1 | |||
5 | OC0B / T1 | PD5 | D5 | A4 | PC4 | ADC4 | SDA | 18 A4 | HV2 | |||
6 | OC0A / AIN0 | PD6 | D6 | A3 | PC3 | ADC3 | 17 A3 | |||||
7 | AIN1 | PD7 | D7 | A2 | PC2 | ADC2 | 16 A2 | |||||
8 | ICP1 / CLKO | PB0 | D8 | A1 | PC1 | ADC1 | 15 A1 | |||||
9 | OC1A | PB1 | D9 | A0 | PC0 | ADC0 | 14 A0 | |||||
10 | OC1B | ~SS | PB2 | D10 | REF | AREF | ||||||
11 | OC2 | MOSI | PB3 | D11 | 3V3 | |||||||
ECHO | 12 | MISO | PB4 | D12 | D13 | PB5 | SCK | 13 | TRIG | |||
To edit table: File:Arduino-nano.tgn |
HC-SR04
Pin | Mapping | |
---|---|---|
VCC | POWER_IN | |
Trig | ||
Echo | ||
GND | GND | |
To edit table: File:HC-SR04.tgn |